Full Automatic Non Woven Cutting Machine Large Scale Non Woven
Fabric Cutting Machine
Equipment can be slitting rewinding spunlace cloth, wood pulp
cloth, non-woven, meltblown, Jakob, spunbond nonwovens and, product
cutting neat without burr, the machine for processing with or
without mandrel, equipment volume, light box cloth inspection,
cutting, counting, winding at the same time, according to customer
production require the replacement of various plant configurations.
For details, please contact us.
Circular knife cutting
Custom punching device
Special pneumatic compression device, technology and domestic lead
Cutting raw material
spunlace cloth, non-woven, meltblown, Jakob
, spunbond nonwovens and can be classified
textile materials, such as paper cutting,
comes materials and the field test.
Stepless speed regulation, PLC programming
Depending on the material
Specific weight depending on the machine configuration
1 Equipment, light box inspection cloth, cutting, counting, winding
at the same time.
2 The original cloth is placed in a single cylinder synchronous
conveying system, gas - up - shaft, put the roll diameter 350mm and
the use of the electroplating light roll.
3 Machine door width 3500 mm, the maximum diameter of 1200 mm.
In the machine speed can be adjusted to 150 m / min (specific
according to the characteristic of constant speed), the normal
production speed at 60-100 meters / min.
5. Machine equipped with a cylinder 6, the whole machine frame are
made of 40mm thick steel, which put the roll stand about 1500mm x
high 2000mm; check cloth aisle width of about 1500mm, the volume is
about 1500mm x high 2000mm.
6 The equipment is equipped with 13 high precision aluminum alloy
Phytosome and, with blast discharge waste device, stepless speed
regulation, slitting and rewinding speed, counting, online cutting
air knife 5 sets.
7. The cutting width can be adjusted in a certain range, the
maximum diameter of the product is 1200 mm (1200mm) can be
8 Equipment used in the production of Taiwan shear type pneumatic
knife, left and right to adjust, adjust the cutting width is
convenient and flexible.
9 Tension control with 100 kg servo tension sensor, and the coil
servo equipped with worm gear worm gear box.
11 Coiling device with the whole exhaust pressure adjusting device,
both ends of the linear slide up and down movement, tooth row of
parallel positioning coiling roller, gas expansion shaft winding,
coiling drum diameter 350mm (which 1 root with wear-resistant
roller, 1 piece of plating and).
10 Machine power 13.5KW, electrical uses PLC and touch screen (10
inches), servo system control, which unwinding servo by 5.5kW,
winding servo use 7.5kW, servo motor by Taiwan "Xinjie" brand,
touch screen with Taiwan "Willen" brand, electrical parts wiring
specification is reasonable, safe, clean and easy to operate.
12. Machine wall is fixedly connected with the formed steel,
surface and antirust processing, all machine bedplate must do
antirust paint processing, frame welding is accurate in size, stent
of appropriate reinforcement, and all transmission part adopt
synchronous belt transmission to ensure stable operation of the
The main components of the 13 standard parts are made of high
quality 45# steel and inner six angle screw, and stainless steel
material is used for the health effects of products.
The company also provides a variety of rolling, rolling, magnetic
powder, magnetic powder, the control of the rolling force control,
conveyor belt control, servo control and other methods, in order to
meet the requirements of various products, to achieve the best
At present the same industry, the same equipment in the production
of quality or technical indicators are not comparable with our